Tel: +86-411-82311192

E-mail: baikun@shungji.com

You are here: Home > Knowledge > Content
What are the types of knife tools required for the shearing machine?
- Jul 28, 2018 -

The development of science and technology is getting faster and faster. Nowadays, there are more and more kinds of products, and the use is different. So, what are the cutting machine tools produced by the blade cutter manufacturers?

    

1. Special shearing machine blade: use with other equipment to complete special use

    

 2, multi-purpose shearing machine:

    

        a, combined punching machine blade: can complete the cutting of the board, and can cut the profile, mostly used in the cutting process

    

    b. Sheet bending and shearing machine: that is, two processes of cutting and bending can be completed on the same machine.

    

3. Oblique blade shearing machine blade: The upper and lower blades of the shearing machine are at an angle. Generally, the upper blade is inclined, and the inclination angle is generally 1° to 6°. The shearing force of the inclined blade shearing machine is smaller than that of the flat blade shearing machine, so the motor power and the weight of the whole machine are greatly reduced, and the practical application is the most, and the shearing machine manufacturers often produce such shearing machines.

    

4, flat blade shearing machine tool: good cutting quality, small distortion, but large shear force, energy consumption. More mechanical transmission. The upper and lower blades of the shearing machine are parallel to each other, and are often used for hot-shearing rolling of billets and slabs in rolling mills; and according to the shearing manner, they can be divided into upper cut type and lower cut type.