Metal Shear Slitting Blades

 

 

 

 

 

SHJ KNIFE focuses on industrial replacement blades for coil processing, service centers and steel mills. Our metal shear slitting blades form the core of this range. They work as top and bottom slitter knives for steel and stainless steel coils on narrow and wide slitting lines.

 

On a coil line, slitter knives run day after day. If the steel grade, edge profile or tolerance is not right, you see burr, camber and strip marks very quickly. We design our rotary slitting blades for metal coils to match real production, not just a drawing. The target is clean cuts, stable burr and longer time between regrinds.

 

We build full sets: top and bottom slitter knives for steel, matching spacers, separator discs and related industrial machine knives. This lets you source the full cutting section from one supplier and keep settings consistent.

 

 

 

Our role is not only to ship rings with your sizes. We work as a technical partner for coil slitting line knives. Many customers come to us with mixed issues: some coils show burr, some show edge wave, some lines need too many knife changes.

In these cases we:

Review the current knife dimensions and tolerances

Check steel grade and hardness against your strip mix

Look at the edge profile and spacer / separator set-up

Propose changes that fit within your existing tooling layout

Because we supply a full package of metal shear slitting blades, spacers and discs, we can tune the whole cutting section as one system. This is often more effective than changing one part at a time.

 

 

A working slitter head contains more than just knives. It includes:

 

• Top and bottom slitter knives for steel coils
• Precision ground spacers or spacer sleeves
• Separator discs and overarm assembly
• Lock rings and other hardware

 

Our metal shear slitting blades act as both top and bottom tools. The top slitter does the cutting together with the bottom slitter. Spacers define the strip width. Separator discs keep strips apart and guide them to the recoiler.

We produce:

 

• Top knives with various edge profiles
• Bottom knives with matching diameters and faces
• Spacer rings and slitter separator disc sets
• Spacer sleeves for quick set-ups on some lines

 

When you treat these elements as one family of rotary metal slitters, you get cleaner cuts and faster changeovers. Tolerance and flatness across knives and spacers matter as much as steel grade.

 

 

 

 

We offer several tool steels and hard materials for metal shear slitting blades, and we choose them based on the coils you process:

 

• D2 / Cr12MoV – high-carbon, high-chrome cold-work steels with good wear resistance. They work well for many carbon steel and coated coil applications.
• H13 – hot work steel with better hot hardness and toughness. Suitable when temperature or impact is higher, or when the line is close to a hot process.
• HSS (High Speed Steel) – for very long life on demanding jobs, such as stainless and silicon steel with strict burr limits.
• Carbide or TC-tipped solutions – for specific cases where extreme wear resistance is required and line conditions allow.

 

For typical steel and stainless steel slitting knives:

 

• Carbon and mild steel – often use D2 / Cr12MoV at 58–60 HRC.
• Stainless steel and higher strength grades – may require HSS or higher hardness cold-work steel for more life.
• Silicon steel – needs clean, sharp edges and stable microstructure, so we focus on good HSS with controlled hardness.
• Aluminum and non-ferrous – knife steels still matter, but sometimes lower hardness with polished edges works better for surface protection.

 

We do not push one material for all jobs. Instead, we use your strip mix and line data to choose the most suitable steel for your metal shear slitting blades.

 

 

Edge geometry is one of the key tools to control burr and strip edge shape. Our metal shear slitting blades support several profiles, for example:

 

• Standard single bevel edges for general coil slitting
• Double bevel profiles for thicker or harder strip
• Compound bevels to balance penetration and edge support
• Special micro-chamfers for clean edges on thin coated strip

 

With the right edge profile, coil slitting line knives can:

 

• Reduce entry burr and exit burr height
• Improve strip tracking and reduce edge wave
• Decrease knife chipping on hard material

 

We work with plant engineers to match edge geometry with knives, spacers and separator discs. The goal is not only a sharp edge, but a full set of top and bottom slitter knives for steel that cut cleanly, run stable and regrind well.

 

 

Good steel and edge geometry still need clean machining and grinding. That is why we hold tight tolerances on OD, ID, thickness and flatness for our rotary slitting blades for metal coils.

This gives you:

Precise strip width after each set-up

Stable overlap and clearance across the whole cut

Lower burr growth from coil to coil

Less time spent chasing settings during production

When you combine proper knives with accurate spacers and discs, the slitter head acts as a complete system. This is key for reliable coil slitting line knives performance.

 

 

Many customers approach SHJ KNIFE when they want to switch suppliers but keep their existing tooling layout. In this case, we offer OEM replacement metal slitting blades that match your current dimensions and fit your arbors and overarms.

 

Typical steps:

 

• You send us drawings or samples of the slitter knives, spacers and discs.
• We check all sizes, tolerances and hardness, and confirm the material grade.
• We review your strip mix and line speed.
• We propose a set of metal shear slitting blades and related parts, either identical to your current design or with targeted improvements.

 

Custom options include:

 

• Change of steel grade for better life on stainless or high-strength grades
• Modified hardness target to improve toughness or wear
• Adjusted edge profile for better burr control
• Spacer and separator disc adjustments to stabilize strip tracking

 

Because we produce a wide range of industrial replacement blades and accessories, we can redesign the whole cutting section if needed, not just the knife ring.

 

 

To protect your line and coils, every batch of metal shear slitting blades passes a structured quality routine:

 

• Incoming steel inspection and marking
• In-process checks during machining, heat treatment and grinding
• Final inspection of dimensions, hardness, flatness and runout

 

Only knives that pass all checks move to packaging. We protect each knife with rust-preventive oil or paper, apply edge guards and use strong cartons or wooden cases. The same care goes to spacers and separator discs.

For export shipments, we can combine metal shear slitting blades, roll shear knives, straight metal shear blade sets and other metal cutting blades into one lot. This reduces freight cost and simplifies your purchase and warehouse process.

 

 

To help us design the right metal shear slitting blades for your slitting line, please prepare:

 

• OD, ID and thickness of current top and bottom knives
• Spacer dimensions and separator disc sizes
• Strip material types and thickness range
• Line speed and typical coil width
• Current issues: burr level, edge wave, knife life, chipping, etc.

 

With this information, SHJ KNIFE can propose coil slitting line knives that match your real working conditions. The result is a practical upgrade path from standard tools to a more robust, line-specific set of industrial replacement blades.

 

Hot Tags: metal shear slitting blades, metal shear slitting blades suppliers, manufacturers, factory, Metal shear blade