Knowledge

The mechanical knife and the fixed knife are the main components of the plastic crusher, and the interaction between them directly affects the crushing effect. The shape, size and

Hob is divided into gear hob, worm gear hob, non-involute spread into hob and fixed hob, etc., processing, the hob is equivalent to a spiral gear with a large helix Angle, the numb

The application of machinery has greatly improved production efficiency and reduced labor production costs. However, the types of machinery are very wide, basically covering all in

Improvement measures for producing size grain in the pelletizing process of polypropylene 1. Suitable knife pressure and cooling water temperature: The size of the knife pressure d

The so-called granulation process is actually the process of enlarging the particle size. That is, when a certain amount of masterbatch is input on the rotating rotor and air is bl

Polypropylene is a kind of polymer formed by polymerization of propylene monomer under the action of catalyst. It is a non-toxic, relatively low density, high heat resistance, good

The crusher can be used for: • Bulky waste, wood, furniture, plastics, industrial materials, construction and commerce; • Wooden pallets and green waste; • Municipal

In the actual production of the underwater pelletizing machine, if the edge of the slice has sharp corners, in the process of conveying materials, the sharp corners will rub with t

Spray water pelletizer, suitable for most polymers except those with low or viscous melt viscosity. This type of equipment is also known as the water ring pelletizer, the molten po

There are many different pelletizing line designs on the market, which are divided into two categories according to the arrangement of the pelleting process time: cold pelleting sy

Plastic crusher is used to crush various plastic plastics and rubber such as plastic profiles, tubes, rods, silk threads, films, and waste rubber products. The pellets can be direc

The cold granulation system consists of a mold, a cooling zone (air-cooled or water-cooled), a drying zone (if water-cooled), and a granulation chamber. It is divided into two cate