The shredder blade is one of the most important parts of the industrial equipment of the shredder and is one of the parts that our workers are in direct contact with. Therefore, we should be very cautious about its operation, on the one hand to avoid the damage of the blade, and on the other hand for the safety of the operator. So what do you need to pay attention to when the shredder blade is in operation?
1. First of all, we must ensure that the blade and the shredder are installed very firmly, and that the loose parts should be tightened in time to avoid the blade falling off.
2. Check if the tightness of the belt is suitable and adjust it in time.
3. Before we use the shredder, we should first turn the blade by hand. This is to check if the blade is flexible enough. When you find that the rotation is not flexible, you can apply some lubricant.
4. See if the direction of the shredder blade rotation is correct. There will be arrows pointing on the smashing machine to remind you of the correct direction of rotation.
5. We are not forced to replace the belt of the shredder. Because the speed of the belt affects the use of the shredder blade, such as the belt speed is too fast, the blade is likely to break. But if it is too slow, it will reduce work efficiency.
6. After we start the pulverizer, wait for the shredder blade to rotate for a few minutes to see if there is any abnormality. When it is determined that the shredder can work normally, we are smashing the materials.
Related Industry Knowledge
- The selection of the blade material of the plas...
- Maintenance regulation of cutting machine blade
- The selection of slitting blades
- Intelligentization of cutting tool and cavity m...
- Efficient hybrid tool: chassis parts processing...
- Selection of jig tool and determination of cutt...
- Application advantages of cutting tool dry cutt...
- The main angle of the lathe tool
- Measuring the auxiliary plane of the lathe tool
- The characteristics of common tools in NC machi...
- Red hardness
- Wood peeling knife grinding video
- machine knife leveling before grinding
- How to get veneer and plywood?
- Advantages of using veneers
- Process improvement of slitting circular blade
- Circular blade uses high speed steel as the mat...
- The absolute advantages of the cutting machine ...
- How to repair the crusher blade?
- Cutting machine blade wear and solution