Wood chipper output is associated with the adjustment chipper blade
1. When tightening the flying knife and the bottom knife, it is necessary to use a torque wrench and a torsion wrench capable of accurate torque, and tighten according to the torque value of the rule.
2. Jiulong mechanical chipper flying knife bolt and bottom knife bolt are special high-strength bolts (the bolt head is marked). It must not be replaced by ordinary bolts to prevent the occurrence of shortcomings. The service life of high-strength bolts is one year, and it is necessary to replace them all after one year of use.
3, the flying knife is necessary to replace the set, when sharpening, the two flying knife sharpening should be together, to ensure that each set of flying knife weight together, to ensure the weight of each set of flying knife together, to avoid causing machine vibration.
4. When the flying knife and the bottom knife are sharpened, it is necessary to add coolant to prevent the blade from overheating or causing the edge of the blade to ensure the wear resistance of the blade.
5, the flying knife generally 1-2 classes sharpening once, after the flying knife has been changed 4 times, the bottom knife should be pulled out:
Check the bottom knife condition and replace the bottom knife edge (the bottom knife generally has 2-4 cutting edges, one cutting edge wears, replaces the other cutting edge, and after all the cutting edges wear, it is sharpened once).
The contact surface of the bottom knife seat should be lubricated so that the bottom knife holder can be easily withdrawn when the bottom knife is replaced.
6. The flying knife scheduling standard is fixed value, and no modification is allowed. If the flying knife and the bottom knife empty space do not meet the requirements of the rules, only the bottom knife standard is allowed to be adjusted.
