Hard metal cutting knife operation notice

Hard metal cutting knife operation notice

When the operation of what are the points of attention?

1, the hard metal cutting knife operation notice after starting, should pay attention to keep it idle first 2-3min, if not found abnormal after the feeding work.

2, the hard metal cutting knife before starting, you can use the hand to rotate the rotor, check the grinder blade is not reliable, there is no collision phenomenon, to see whether the rotation direction of the blade and the direction of the arrow pointing in line with the machine, the lubrication of the grinder is good;

3, do not easily replace the pulley, so that the speed is too high to cause crusher blade cracking phenomenon, or speed too low impact on work efficiency.

4, the hard metal cutting knife after installation to check the fastening of each part of the fastener, if there is loosening to be sure to give to tighten. At the same time to check whether the belt tightness is appropriate.