How to choose shredder cutting knife?

The types of discarded materials in the energy recycling industry are very diverse. Under normal conditions, no shredder can be used for every material. This is not only an over-the-top challenge for the shredder, but also may reduce the life of the shredder. The shredders have different classifications. Depending on the classification, the shredder knives used will also have a gap. There's single-shaft shredder and double shaft shredder, and the single-shaft shredder uses a single-shaft shredder knife. The single-shaft shredder has several advantages:

First, the particle size is even when the material is broken.

Second, the power of the single-shaft shredder is also very strong.

Third, the loss of the pulverized material to the shredder is relatively small.

Fourth, the maintenance cost of the single-shaft shredder is also very low. These advantages make the single-shaft shredder widely used in biomass shredding, plastic film shredding, wood shreds and metal shredding, which also have a greater effect on glass fiber crushing, crushing and recovery of FRP and other solid waste materials.

One of the most important parts of the single-shaft shredder is the single-shaft shredder knife. When selecting the single-shaft shredder knife, choose the appropriate shredder knife according to the different shredder. So what do you need to pay special attention to when choosing a single-shaft shredder knife? Discarding materials that can be used in people's lives and industrial manufacturing can be basically divided into three types: wood, plastic rubber and metal. This obviously means that for different materials, the selection of shredders and shredder knives should also be targeted. To shred the metal, you have to use a shredder and a knife that are specially used to shred metal. If you use a plastic shredder at this time, not only will the blade be damaged, but it may also cause certain damage to the shredder. Will seriously affect the progress of the production of waste materials.

In general, the main basis for selecting the shredder is based on the power of the machine. For example, the shredder power for making metal must be greater than the power of the machine that shreds wood or plastic rubber. After the machine was selected, the shredder knives used were naturally tailored to the machine and the material to be shredded.

Choosing the right shredder knife is not only cost-saving, but also improves the efficiency of the entire operation. The selection of the single-shaft shredder knife is based on the relative materials to make reasonable purchases, and the use of the single-shaft shredder can make the resources rational use and maximize the efficiency when making discarded materials.