Wood chipper and blade
Wood chipper
Wood chipper is the most common kind of woodworking equipment, mainly by the frame, feed port, cutter head, shell, chipper blade and electric control, the machine can adjust the cutting blade according to the need to produce different specifications and thickness of wood chips. Although there are various types and sizes of chippers, the function is always the same.
The wood is fed by the feed port. When the wood touches the cutting blade, it is cut with the high-speed rotation of the cutting cutter. The cut wood is sent out by the high-speed steam flow generated by the wind blade on the cutting cutter. In the production of chipper, the main raw material is log, and the wood chips produced are widely used in paper making, particle board, MDF and so on.
Chipper blade
The chipper blade is usually made of alloy steel material, which is subjected to professional heat treatment, which is vital important to ensure that the cutting edge is sharp and wear-resistant for a long time, so as to ensure the cutting wood quality and production efficiency.
The sharpness of the chipper tool directly affects the quality of the chipper. There are two kinds of blades, single blade and double blade, and the bar bottom knife of the drum chipper adopts four edges. When cutting with a single blade, it is easy to cut the raw material into pieces; The double-edged blade is suitable for cutting hard and frozen materials.
The grinding Angle of the blade should be determined according to the material to be cut. When cutting hard or frozen materials, the grinding Angle should be large, while the cutting tool grinding Angle of soft materials should be small. In this way, good cutting quality can be ensured and energy consumption can be reduced.
In order to ensure that the edge of the blade is sharp while working, the blade is required to be regularly sharpened and replaced.
In the wood chipper, the part which is more easily damaged, is also blade, and different kinds of wood, the toughness is different, so the degree of ease of cutting is not the same. Chipper blades generally adopt alloy steel, this kind of material has the advantage of high hardness, but as the cutting time is long, easy to damage, the service life is not very long, the choice of blade needs to be careful, longer service life of the blade, not only the overall service life of the machine can be improved, but also a better choice for saving cost.
Dalian Shungji Technology Industry Co., Ltd can provide the chipper blades made of different materials with high cost performance, if any requirement, please contact us.
