About Dish cutter and bottom circular knife

Dish cutter/top cutter and its application?

Top section cutters are also called dish cutters because they have the shape of a dish plate. Top section cutters are used for cutting film, paper and processing industries. The top knife and the bottom knife work in pairs because the top knife regrinds when it comes into contact with the bottom knife. The tip knife is used to cut material mesh and has very long lasting durability. Dish knives are relatively easy to regrind. The top part of the cutting blade can be disk-shaped or flat, with a single, double bevel (edge) or square edge. For scribing cutting, only one blade is used as a roll or sleeve holder as the bottom blade.

Dish knives (or knives can also be called rotary shear blades, top section cutters, top disc cutters) can be used in a variety of machine types. The high-quality steel in the tool makes it especially suitable for challenging work. If you have to cut material that contains a lot of glue and dirt, you don't have to worry about it sticking to the blade. The tool's surface coating provides protection. Our tools can cut plastic film, rubber, paper and more.

What is the bottom circular knife?

The bottom knife is paired with the top slitting knife/dish knife. Compared with the top knife, the bottom knife is located on the lower axis. The main principle of the bottom knife is to position the material web and stretch it so that the top knife can cut. In addition, when the bottom knife is in contact with the top knife, the top knife should be "re-gcircular". Therefore, the correct Angle of the base knife is absolutely necessary. Without a properly tilted base knife, this pair of knives will not be able to perform satisfactorily.

Any questions or are you not sure which circular knife is best for your use? Contact us and we'll answer your questions.