Hydraulic paper cutter use safety precautions

When using the hydraulic paper cutter, in order to prevent accidents, it is recommended that the operator pay attention to the following operations when using:

1. The position and location of the hydraulic paper cutter. The equipment is also different according to the weight of the model. Therefore, please pay attention to safety during the handling process and balance it in a clean environment.

2. For the use of the power supply, connect the device according to the rated voltage on the manual. If the voltage is too high or too low, the equipment will not operate normally. Therefore, it is recommended to use the AC power supply when using the hydraulic paper cutter. Improve work quality and efficiency. Also use this large equipment to ensure that it has a good grounded outlet.

3. There is also a very important note for the use of the power supply, that is, do not overload the voltage. In order to avoid dangerous accidents such as fire or electric leakage.

4. When cleaning the hydraulic paper cutter, set the power off and pull out the power plug.

5. When using the device, do not allow liquid to flow into the inside of the cutter to avoid scrapping the cutter.

6. When using the hydraulic paper cutter, it is forbidden to operate by children or non-professionals. In addition, the underside of the paper cutting blade and the edge of the paper cutting blade must not be removed during operation. At the same time, the cutter blades should not be used to cut hard or crackable materials.