ISO 2768 Standard for machine knife Tolerance
Recently, one customer mentioned ISO 2768 standard when he asked about a machine knife, it reminds to share the standards with you.
This standard shows us the approximate tolerance requirements. For the key machine knife dimensions, you should mark on the drawings clearly. Moreover, for some dimensions which do not need very strict, you should mark too. This will be benefited for both of client and supplier.
ISO 2768 - 1
DK | DE | UK | |
f | Fin | Fein | Fine |
m | Middel | Mittel | Medium |
g/c | Grov | Grob | Coarse |
v | Meget grov | Sehr grob | Very coarse |
length
-3 | -6 | -30 | -120 | -400 | -1000 | -2000 | -4000 | |
f | ± 0,05 | ± 0,05 | ± 0,1 | ± 0,15 | ± 0,2 | ± 0,3 | ± 0,5 | - |
m | ± 0,1 | ± 0,1 | ± 0,2 | ± 0,3 | ± 0,5 | ± 0,8 | ± 1,2 | ± 2 |
g/c | ± 0,2 | ± 0,3 | ± 0,5 | ± 0,8 | ± 1,2 | ± 2 | ± 3 | ± 4 |
v | - | ± 0,5 | ± 1 | ± 1,5 | ± 2,5 | ± 4 | ± 6 | ± 8 |
angle
-10 | -50 | -120 | -400 | 400- | |
f | ± 1° | ± 30' | ± 20' | ± 10' | ± 5' |
m | |||||
c | ± 1° 30' | ± 1° | ± 30' | ± 15' | ± 10' |
v | ± 3° | ± 2° | ± 1° | ± 30' | ± 20' |
fillets and chamfers
-3 | -6 | 6- | |
f | ± 0,2 | ± 0,5 | ± 1 |
m | |||
c | ± 0,4 | ± 1 | ± 2 |
v |
plainness
-10 | -30 | -100 | -300 | -1000 | -3000 | |
H | 0,02 | 0,05 | 0,1 | 0,2 | 0,3 | 0,4 |
K | 0,05 | 0,1 | 0,2 | 0,4 | 0,6 | 0,8 |
L | 0,1 | 0,2 | 0,4 | 0,8 | 1,2 | 1,6 |
rectangular angle measure
-100 | -300 | -1000 | -3000 | |
H | 0,2 | 0,3 | 0,4 | 0,5 |
K | 0,4 | 0,6 | 0,8 | 1 |
L | 0,6 | 1 | 1,5 | 2 |
symmetry
-100 | -300 | -1000 | -3000 | |
H | 0,5 | |||
K | 0,6 | 0,8 | 1 | |
L | 0,6 | 1 | 1,5 | 2 |
symmetry
H | 0,1 |
K | 0,2 |
L |

