Tel: +86-411-82311192


Home > Knowledge > Content
Shredder blades -proper use and safety
- Jul 24, 2018 -

Shredder blades are a common occurrence in today's mechanized operations. They not only accelerate the mechanized mode of operation, but also allow us to experience the advantages of the high-tech market. When the staff use them, although the operation is simple and the process is convenient, but also pay attention to the safety of the following shredder blades.

First, pay attention to the condition of the clothes before using the shredder blades. When we use them to work, we must pay attention to their own dressing situation. Because they are blades, they have a strong sharp effect. Therefore, in clothing, it is best to avoid open-mouth clothes, or fat clothes, wear tights, and tight cuffs to prevent clothes from being cut open. And avoid the best protection points that hurt yourself. Therefore, we must adjust our clothes before using them.

Second, pay attention to the professional situation in the process of using the shredder blade. If you take it out and don't pay attention to the sharpness of the knife edge, unnecessary damage will occur. Therefore, when using them, we must have professional skills. The action is fast, clean and neat, and it can effectively speed up the work process. A safe and secure relationship with ourselves. If you are a non-professional, we should pay attention to the use of the situation, it is best to reduce their workload.

For early shredder blade products, in the event of a paper jam in use, press the reverse button or the stop button to stop the shredder from rotating or rewinding to clear the jammed paper. These machines can only be used after they have cleared the jammed paper. Most of the paper cutters are equipped with overload power-off protection devices, which will automatically stop when the motor is overloaded and heated. At this time, stop using 20 to 30 minutes to cool the shredder blade motor, and at the same time, consider reducing the amount of some input paper appropriately when using it again. At present, the more advanced paper cutter will automatically stop and automatically withdraw paper once it is overloaded, which is more convenient to use. When the box of the paper cutter is full, some machines will automatically emit a sound to remind people to clear the paper scraps in time.

I believe that friends who have used the shredder blade know that the material is an important factor in determining the service life of the blade. Generally speaking, the crusher blade has many kinds of materials. For example, spring steel has the advantages of good toughness and low manufacturing cost, but the disadvantage is that the hardness is low. There is also carbon steel, the hardness is HRC55 °, wear resistance is better. Finally, the tool steel has a hardness of HRC 55° and its wear resistance is good, so the service life is long. In addition to this, there are other materials, such as high-speed steel, hard alloy (tungsten steel).