Three steps to teach you how to use the plastic pelletizer knife correctly

What is a plastic pelletizer knife? The more official explanation is the knife used on plastic machinery. This blade is used in a wide range of applications. The industries involved are plastic particles, plastic recycling, etc., and the types of plastic cutting knives can be divided into: pelletizer knife, crusher knife, and the like. When customers choose the plastic pelletizer knife, they need to pay attention to the relevant indicators such as materials. Of course, it is more important to use the plastic pelletizer knife correctly. Mainly divided into three steps:

Step 1: Stabilize the firmware

Pay special attention to the plastic pelletizer knife and units to be installed firmly. After the plastic pelletizer knife is installed, check the fastening of each fastener. If it is loose, it should be tightened. Also check that the belt tightness is appropriate.

Step 2: Check the plastic pelletizer knife

Before starting the plastic pelletizer knife, first turn the rotor by hand to check whether the plastic pelletizer knife is flexible and reliable, whether there is collision, whether the rotation direction of the plastic pelletizer knife is consistent with the direction indicated by the machine arrow, and whether the pelletizer is well lubricated. Do not change the pulleys casually, in case the rotation speed is too high, causing the plastic pelletizer knife to crack, or the rotation speed is too low, which affects the working efficiency of the plastic pelletizer knife.

Step 3: Correct feeding

Attention should be paid to the operation of the plastic pelletizer knife at work. First, the feeding should be uniform to prevent blockage. Secondly, do not overload the machine for a long time. If vibration, noise, bearing and body temperature are found to be too high, stop the machine immediately and continue working after troubleshooting.